0
home

Pneumatic Drills

home
Showing 8 Items
ViewView
  1. Impact Drill 178 mm

    13mm Jacobs chuck, thumb switch for reverse, auxiliary handle, suitable for screwdriving, heavy duty planetary gearing, NPT air inlet thread for 10mm air hose, 90 PSI (6.3 bar) air pressure, 4CFM* (144 ltr/min) Air consumption, 3/8 -24 spindle thread. Overall length: 178mm.
    Send Inquiry
  2. Angle Drill

    10mm Jacobs chuck, fingertip control of reverse, reverse exhaust, overall head height 94mm, NPT air inlet thread for 10mm air hose, 90PSI (6.3 bar ) air pressure, 4CFM* ( 144 ltr /min ) air consumption, 3/8 -24 spindle thread. Overall Length : 178mm.
    Send Inquiry
  3. Straight Drill

    10mm Jacobs Chuck, stall-resistant, safety lever throttle, high performance, planetary gearing, NPT air inlet thread for 10mm air hose, 90PSI (6.3 bar) air pressure, 4CFM* ( 144 ltr / min ) air consumption, 3/8 24 spindle thread. Overall Length: 190mm.
    Send Inquiry
  4. Impact Drill - 165 MM

    10mm Jacobs chuck, stall resistant, heavy duty bearing, HP motor, NPT air inlet thread for 10mm air hose, 90PSI (6.3bar) air pressure, 4CFM* (144 ltr /min) air consumption, 3/8-24 spindle thread. Overall length: 165mm.
    Send Inquiry
  5. Impact Drill 180 mm

    Hammer finish casing, 10mm Jacobs chuck, stall Resistant, directional front exhaust, needle bearing gears, NPT air inlet thread for 10mm air hose, 90PSI ( 6.3 bar ) air pressure, 4 CFM* (144 ltr/min) air consumption,3/8-24 spindle thread. Overall length: 180mm.
    Send Inquiry
Contact Us

301, Opal Square, R C Dutt Road, Vadodara, Gujarat, 390007, India
Phone :+918037744723